MG996R MG996, RC servo motor

MG996R metal copper gear steering gear/55g server/remote control car/ship/13kg high torque steering gear

01: structure material: analog metal/plastic copper teeth

02: Connection line length: 30cm, signal line (yellow line) red line (power line) brown (ground line)

03: size: 40.7*19.7*42.9mm

04: weight: 55 grams

05: Reaction speed: no load speed 0.17 seconds/60 degrees

(4.8V);0.13 seconds/60 degrees (6.0V)

06: Stall-rotor torque;

07: Working dead zone: 4 microseconds

08: Plug Specification: JR FUTABA General

09: working voltage; 4.8V-6V

10: working torque: 13 KG/cm

11: the use of temperature:-30 ~ ~ 60 degrees Celsius

12: Suitable models: biped robot/manipulator/remote control vehicle, suitable for Class 50-Class 90 methanol fixed-wing aircraft and

26cc-50cc gasoline fixed-wing aircraft and other models

13: Accessories; rudder plate, fixing screws, damping rubber sleeve and aluminum sleeve.

The control of the steering gear generally requires a time base pulse of about 20ms, and the high level part of the pulse is generally the angle control pulse part within the range of 0.5 ms-2.5ms, with a total interval of 2ms. Taking the 180-degree angle servo as an example, the corresponding control relationship is as follows: