-
900,00 د.ج
It works without backlight, that is, in a dark environment OLED display is higher compared to that of LCD display you will like the miniature for its crispness.
The Driver chip of this OLED is SSD1306, which is compatible with IIC communication. So this module can be controlled by I2C.
That is, except the VCC and GND, 2 wires would be needed when using 4-wires I2C mode.
There is also a simple switch-cap charge pump that turns 5v into a low voltage drive for the OLEDs, making this module the easiest ways to get an OLED into your project. -
900,00 د.ج
It works without backlight, that is, in a dark environment OLED display is higher compared to that of LCD display you will like the miniature for its crispness.
The Driver chip of this OLED is SSD1306, which is compatible with IIC communication. So this module can be controlled by I2C.
That is, except the VCC and GND, 2 wires would be needed when using 4-wires I2C mode.
There is also a simple switch-cap charge pump that turns 5v into a low voltage drive for the OLEDs, making this module the easiest ways to get an OLED into your project. -
400,00 د.ج – 650,00 د.ج
- 100k Ohm NTC Thermistor.
- NTC Thin Film Thermistor Cable.
- Nominal value: R25 (25 ℃) : (common) 1.5K, 2K, 5K, 10K, 20K, 30K, 47K, 50K, 100K, 200K, 500K, etc.
- Resistance precision: ± 1%, ± 2%, ± 3%.
- B value R25/50 (common) 3435k, 3600k, 3950k, 3990k, 4100k, 4200k, etc.
- B value accuracy: ± 1%.
- Recommend the use of parameters: R25℃ = 100 k B25/50 = 3950 k ± 1%)
-
1.500,00 د.ج
Ideal for Android™ Smartphones and Tablets
SanDisk® cards are compatible with Android™ smartphones and tablets. -
500,00 د.ج
- Environmentally friendly materials, degradable.
- There are many styles and models, and there are different models for different needs.
-
150,00 د.ج
- Length: 100 mm
- Weight: 30~35 gm each
- 1p-1p pin header
- Compatible with 2.54mm spacing pin headers
- 10pcs chromatic color jump wire
- High quality and in good working condition
- Durable and reusable
- Easy to install and use
- A popular choice for construction or repair
- Be used for the electronic project and Genuine Arduino product
- Flexible Breadboard Jumper Cable Wire allows you plug and unplug easily for prototyping.
- Breadboard connections which allow you plug and unplug easily for prototyping and can be used over and over again.
-
850,00 د.ج – 1.200,00 د.ج
- 16 characters wide, 2 rows
- Blue/Green Backlight
- 5×7 Dot Matrix Character + Cursor
- HD44780 Equivalent LCD Controller/driver Built-In
- 4-bit or 8-bit MPU Interface
- Works with almost any Microcontroller
- Can be fully controlled with only 6 digital lines! (Any analog/digital pins can be used)
-
1.500,00 د.ج
- The LCD Keypad shield is developed for Arduino compatible boards, to provide a user-friendly interface that allows users to go through the menu, make selections etc.
- It consists of a 1602 white character blue backlight LCD.
- The keypad consists of 6 keys select, up, right, down, left and reset.
- To save the digital IO pins, the keypad interface only uses one ADC channel.
- The key value is read out through a 5 stage voltage divider.
-
250,00 د.ج
- The 3.7V 2 x 18650 plastic battery holder for lithium batteries case can use 2x 18650 batteries to supply any power system using 3.7V
-
550,00 د.ج
- 18650 Rechargeable Battery 2600mAh 3.7V Li-ion Lithium Battery original
-
350,00 د.ج
- 18650 Rechargeable Battery 5800mAh 3.7V Li-ion Lithium Battery
-
1.100,00 د.ج
- High conversion rate
- High efficiency output
- Excellent weak light effect
-
250,00 د.ج
- Length: 200 mm
- Weight: 30~35 gm each
- 1p-1p pin header
- Compatible with 2.54mm spacing pin headers
- 10pcs chromatic color jump wire
- High quality and in good working condition
- Durable and reusable
- Easy to install and use
- A popular choice for construction or repair
- Be used for the electronic project and Genuine Arduino product
- Flexible Breadboard Jumper Cable Wire allows you plug and unplug easily for prototyping.
- Breadboard connections which allow you plug and unplug easily for prototyping and can be used over and over again.
-
2.000,00 د.ج
- Supply voltage: 5V
- View angle: 6 O’clock
- Display type: positive / negative type
- Operating temperature: -20°C – +70°C
- Storage temperature: -30°C – 80°C
- Size: approx. 9.8cm x 6cm x 1.2cm
-
450,00 د.ج
- Une carte adaptateur d’extension GPIO rouge(Ne comprend pas la planche à barbe 400 Points)Câble ruban plat 26 broches 2.54-picth 200mm
 |
