Power Supply 12V 2A Converter AC/DC Adapter
- Input 100-240V / – 50-60Hz/ 200mA
- Output 12V-2A
compatable with other router 12V 2A as well.
Condition: New
| voltage | 12V, 24V |
|---|
1.200,00 د.ج
- Red LED checks the state of the proximity sensor
- High repeated positioning accuracy
- High switching frequency
- Wide voltage range
- Total Length of cylinder: 62mm.
- Thread length: 40mm.
- Outer (Theard) Diameter: M12
- Antivibration, dust, water and oil prevention
- Reverse power protection, short circuit protection, directly connecting with PLC
- Can replace small switches and limit switches
2.200,00 د.ج
- Print the Widest Range of Materials Possible
- High-Temperature Performance
- High-Quality Printing
- Easy Mounting and Community Support
3.500,00 د.ج
- Using a large screen LCD 2004 4 lines of 20 characters per line Included adapter for RAMPS 1.4 board.
- After connecting this panel to your RAMPS 1.4 board, the smart controller supplies power to your SD card.
- The smart controller by the encoder creates all other operations, such as calibration or axis movement etc.
- 3D design print without a computer, just use the G code design stored on the SD card.
- Popular RepRap 3D Printer LCD Controller and SD Card Reader.
600,00 د.ج
- Simple step and direction control interface
- Five different step resolutions: full-step, half-step, quarter-step, eighth-step, and sixteenth-step
- Adjustable current control lets set the maximum current output with a potentiometer.
- Intelligent chopping control that automatically selects the correct current decay mode (fast decay or slow decay)
- Over-temperature thermal shutdown, under-voltage lockout, and crossover-current protection
- Short-to-ground and shorted-load protection
550,00 د.ج
-
Power Supply 5V 3A Converter AC/DC Adapter
-
Input 100-240V / – 50-60Hz/ 200mA
- Output 5V-3A
750,00 د.ج
- Input voltage: 90-220V AC
- Maximum power: 2000W
- Adjustable voltage: 50-220V AC
- Material: plastic, metal
- Chip is 25A. If you use this for voltage adjustment, 1000W, under 5A is nice. If you use this for electrical machine, under 3A is nice.
- Size: 4.8cm x 5.5cm x 2.7cm.
- Weight:41 g
1.450,00 د.ج
- Input voltage: 100-240VAC
- Output voltage: DC12V
- Max output current: 5A
- Working temperature : -10℃ ~ + 50 ℃
- Storage temperature : -20℃～+85℃
- Power input frequency : 50/60Hz.
550,00 د.ج
- Simple step and direction control interface
- Five different step resolutions: full-step, half-step, quarter-step, eighth-step, and sixteenth-step
- Adjustable current control lets set the maximum current output with a potentiometer.
- Intelligent chopping control that automatically selects the correct current decay mode (fast decay or slow decay)
- Over-temperature thermal shutdown, under-voltage lockout, and crossover-current protection
- Short-to-ground and shorted-load protection
2.200,00 د.ج – 3.000,00 د.ج
- The extension board can be used for Small CNC routers, Carving Machine, 3D Printers, DIY Laser Cutters, and almost any project where you need to control a stepper motors with high precision
- This shield allows you to control upto 4 stepper motors
- Controller each stepper motor requires 2 IO Pins only, which saves a lot of IO Pins for other purposes
- Arduino compatible
450,00 د.ج
-
Package: 3pcs Limit Switch.
-
Compatible with most 3D Printer.
-
Easy to replace.
-
Made of premium metal material for durable use.
1.400,00 د.ج
-
3D Printer Hot Bed Power Expansion Board Heating Controller MOSFET High Current Load Module 25A 12V or 24V for 3D Printer Parts
Reviews
There are no reviews yet.