-
300,00 د.ج
-
Compatiable:1.75mm Filament Material:Brass Hole Size:0.4mm Weight::2g Nozzle:MK10 Printing Materials:PLA, Flexible Rubber, Wood, TPU Screw Thread:M6 Hexagon Diameter:6mm Print Speed: 20-150mm/s
-
-
900,00 د.ج
It works without backlight, that is, in a dark environment OLED display is higher compared to that of LCD display you will like the miniature for its crispness.
The Driver chip of this OLED is SSD1306, which is compatible with IIC communication. So this module can be controlled by I2C.
That is, except the VCC and GND, 2 wires would be needed when using 4-wires I2C mode.
There is also a simple switch-cap charge pump that turns 5v into a low voltage drive for the OLEDs, making this module the easiest ways to get an OLED into your project. -
900,00 د.ج
It works without backlight, that is, in a dark environment OLED display is higher compared to that of LCD display you will like the miniature for its crispness.
The Driver chip of this OLED is SSD1306, which is compatible with IIC communication. So this module can be controlled by I2C.
That is, except the VCC and GND, 2 wires would be needed when using 4-wires I2C mode.
There is also a simple switch-cap charge pump that turns 5v into a low voltage drive for the OLEDs, making this module the easiest ways to get an OLED into your project. -
400,00 د.ج – 650,00 د.ج
- 100k Ohm NTC Thermistor.
- NTC Thin Film Thermistor Cable.
- Nominal value: R25 (25 ℃) : (common) 1.5K, 2K, 5K, 10K, 20K, 30K, 47K, 50K, 100K, 200K, 500K, etc.
- Resistance precision: ± 1%, ± 2%, ± 3%.
- B value R25/50 (common) 3435k, 3600k, 3950k, 3990k, 4100k, 4200k, etc.
- B value accuracy: ± 1%.
- Recommend the use of parameters: R25℃ = 100 k B25/50 = 3950 k ± 1%)
-
1.500,00 د.ج
Ideal for Android™ Smartphones and Tablets
SanDisk® cards are compatible with Android™ smartphones and tablets. -
500,00 د.ج
- Environmentally friendly materials, degradable.
- There are many styles and models, and there are different models for different needs.
-
150,00 د.ج
- Length: 100 mm
- Weight: 30~35 gm each
- 1p-1p pin header
- Compatible with 2.54mm spacing pin headers
- 10pcs chromatic color jump wire
- High quality and in good working condition
- Durable and reusable
- Easy to install and use
- A popular choice for construction or repair
- Be used for the electronic project and Genuine Arduino product
- Flexible Breadboard Jumper Cable Wire allows you plug and unplug easily for prototyping.
- Breadboard connections which allow you plug and unplug easily for prototyping and can be used over and over again.
-
2.000,00 د.ج
10Pcs 0.1mm to 1.0mm PCB Print Circuit Board Micro Drill Bits Set Tool
-
2.000,00 د.ج
10pcs 0.3mm to 1.2mm PCB mini drill Bit tungsten steel carbide for print circuit board cnc drill Bits Machine
-
3.700,00 د.ج
- Popular RepRap 3D Printer LCD Controller and SD Card Reader Included adapter for RAMPS 1.4 board Fully supported by Marlin firmware With Smart LCD Controller you can print 3D designs without USB connection to your computer.
- LED background light control circuit
- This controller is 100% compatible with original design.
- LED background light control circuit, a small function of intelligent controller, With pin short time to decide on all LED turn or steering 30 seconds
- You can turn on the light time to do long or short form of the adjustment TRIM R4100K from 10 seconds to 2 minutes If you use a print job at night and parts department, which means that the new modifications LCD back light would be suitable for you.
-
1.400,00 د.ج – 5.200,00 د.ج
- Input Voltage: AC 110 – 240V 50 / 60Hz
- Output Voltage: 12V DC, 5A
- Output voltage: Adjustment Range: ±20%
- Protections: Overload / Over Voltage / Short Circuit
- Category: Switch Mode Power Adapter (SMPS)
- Shell Material: Metal Case / Aluminum Base
- Color: Sliver
-
1.250,00 د.ج
- Input voltage: 100-240VAC
- Output voltage: DC12V
- Max output current: 3A
- Working temperature : -10℃ ~ + 50 ℃
- Storage temperature : -20℃～+85℃
- Power input frequency : 50/60Hz.
-
1.450,00 د.ج
- Input voltage: 100-240VAC
- Output voltage: DC12V
- Max output current: 5A
- Working temperature : -10℃ ~ + 50 ℃
- Storage temperature : -20℃～+85℃
- Power input frequency : 50/60Hz.
-
1.400,00 د.ج
- Input voltage: 100-240VAC
- Output voltage: DC12V
- Max output current: 3A
- Working temperature : -10℃ ~ + 50 ℃
- Storage temperature : -20℃～+85℃
- Power input frequency : 50/60Hz.
-
850,00 د.ج – 1.200,00 د.ج
- 16 characters wide, 2 rows
- Blue/Green Backlight
- 5×7 Dot Matrix Character + Cursor
- HD44780 Equivalent LCD Controller/driver Built-In
- 4-bit or 8-bit MPU Interface
- Works with almost any Microcontroller
- Can be fully controlled with only 6 digital lines! (Any analog/digital pins can be used)
 |
