Sold Out
Roll over image to zoom in
Based on 0 reviews
0.00
Overall
|
|
0% |
|
|
0% |
|
|
0% |
|
|
0% |
|
|
0% |
Be the first to review “Beelink GK-Mini Mini PC” Cancel reply
SKU: INO-PC-001
Categories: RASPBERRY PI, RASPBERRY PI CARDS
450,00 د.ج – 1.750,00 د.ج
- Equipped with high-current relay, AC250V 10A ; DC30V 10A
- Indication LEDs for Relay output status
- Equipped with screw holes for easy installation
- 5V 1/2/4/6/8 Channel Relay interface board, and each one needs 15-20mA Driver Current.
- Equipped with high-current relay, AC250V 10A ; DC30V 10A.
- Standard interface that can be controlled directly by microcontroller (Arduino , 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic).
- Indication LED s for Relay output status.
Raspberry Pi Zero W Starter Kit + Official Case + Heat Sink +2 x 20 pin GPIO Header better than Raspberry Pi Zero 1.3
900,00 د.ج
- 1.5 Meter Cable lead.
- TYPE-C USB Connector.
- Short circuit, over-current and over-voltage protection.
- 50,000 hours Mean time between failure (MTBF).
- Type: AM2302.
- Ultra-Low Power.
- No Additional Components.
- Long-Distance Signal Transmission.
- All Calibration, Digital Output & Completely Interchangeable.
- Relative Humidity & Temperature Measurement.
- Humidity Measurement Precision: ±2-5% RH.
- Temperature Measurement Precision: ±0.5 deg C.
- 4-pin package.
- Ultra-low power.
- Excellent long-term stability.
- All calibration, digital output.
- Completely interchangeable.
- 30 x 30 x 10mm casing Frame size
- 25mm mounting hole spacing
- Cable Length 28 CM
- 4x 20mm Bolt and nuts are included
- Ready to plug Connector for Pi board
- Color: Black
- LM2596 DC-DC Buck module;
17.800,00 د.ج
- Broadcom BCM2837B0, Cortex-A53 (ARMv8) 64-bit SoC @ 1.4GHz
- 1GB LPDDR2 SDRAM
- 2.4GHz and 5GHz IEEE 802.11.b/g/n/ac wireless LAN, Bluetooth 4.2, BLE
- Gigabit Ethernet over USB 2.0 (maximum throughput of 300 Mbps)
- Extended 40-pin GPIO header
- Full-size HDMI
- 4 USB 2.0 ports
- CSI camera port for connecting a Raspberry Pi camera
- DSI display port for connecting a Raspberry Pi touchscreen display
- 4-pole stereo output and composite video port
- Micro SD port for loading your operating system and storing data
- 5V/2.5A DC power input
- Power-over-Ethernet (PoE) support (requires separate PoE HAT)
- 1 Pcs MAX30102 Heart Rate Sensor Module Puls Detection Blood Oxygen Sensor Concentration Test Module for arduino STM32
800,00 د.ج
- Set of 3 aluminum heat sinks
- Suitable for Raspberry Pi B+, Pi 2 B, Pi 3B, Pi 4B. Preferably use with Raspberry Pi 4 Model B
- These heat sinks have profiles that are short enough to fit within standard Raspberry Pi cases.
- Material: aluminum
- Color: Black
- Micro SD Card Module Mini TF Card Read and Write Module with SPI Interface
Raspberry Pi 400 is your complete personal computer, built into a compact keyboard. Featuring a quad-core 64-bit processor, 4GB of RAM, wireless networking, dual-display output, and 4K video playback, as well as a 40-pin GPIO header, it’s the most powerful and easy-to-use Raspberry Pi computer yet. Raspberry Pi 400 is also available as part of a complete kit including a mouse, power supply, preloaded SD card, and more.
- RP2040 microcontroller chip designed by Raspberry Pi
- Dual-core Arm Cortex M0+ processor, the flexible clock running up to 133 MHz
- 264KB of SRAM, and 2MB of onboard Flash memory
- The castellated module allows soldering directly to carrier boards
- USB 1.1 with device and host support
- Low-power sleep and dormant modes
- Drag-and-drop programming using mass storage over USB
- 26 × multi-function GPIO pins
- 2 × SPI, 2 × I2C, 2 × UART, 3 × 12-bit ADC, 16 × controllable PWM channels
- Accurate clock and timer on-chip
- Onboard temperature sensor
- Accelerated floating-point libraries on-chip
- 8 × Programmable I/O (PIO) state machines for custom peripheral support
- SD card interface works with FAT16 or FAT32 formatted cards. 3.3v level shifter circuit prevents damage to your SD card
- Real time clock (RTC) keeps the time going even when the Arduino is unplugged. The battery backup lasts for years
- Included libraries and example code for both SD and RTC mean you can get going quickly Prototyping area for soldering connectors, circuitry or sensors.
- Onboard 3.3v regulator is both a reliable reference voltage and also reliably runs SD cards that require a lot of power to run
- Works with Arduino UNO, Duemilanove, Decimila, Leonardo or ADK/Mega R3 or higher. ADK/Mega R2 or lower are not supported
- Size: 68 x 53 x 23 mm (approx)
-
Standard For Shield interfaces and shape
-
Can continue to stack other For expansion boards
-
3 M3 screw positioning holes for easy installation
-
High Drive (5V or 3.3V) normally open contact closure
-
Onboard relay indicator (red)
Smart Electronics New for Arduino Diy Smart Car Robot Reflective Photoelectric 3pin IR Infrared Obstacle Avoidance Sensor Module
250,00 د.ج
- Length: 200 mm
- Weight: 30~35 gm each
- 1p-1p pin header
- Compatible with 2.54mm spacing pin headers
- 10pcs chromatic color jump wire
- High quality and in good working condition
- Durable and reusable
- Easy to install and use
- A popular choice for construction or repair
- Be used for the electronic project and Genuine Arduino product
- Flexible Breadboard Jumper Cable Wire allows you plug and unplug easily for prototyping.
- Breadboard connections which allow you plug and unplug easily for prototyping and can be used over and over again.
Reviews
There are no reviews yet.