-
3.700,00 د.ج
- Popular RepRap 3D Printer LCD Controller and SD Card Reader Included adapter for RAMPS 1.4 board Fully supported by Marlin firmware With Smart LCD Controller you can print 3D designs without USB connection to your computer.
- LED background light control circuit
- This controller is 100% compatible with original design.
- LED background light control circuit, a small function of intelligent controller, With pin short time to decide on all LED turn or steering 30 seconds
- You can turn on the light time to do long or short form of the adjustment TRIM R4100K from 10 seconds to 2 minutes If you use a print job at night and parts department, which means that the new modifications LCD back light would be suitable for you.
-
1.400,00 د.ج – 5.200,00 د.ج
- Input Voltage: AC 110 – 240V 50 / 60Hz
- Output Voltage: 12V DC, 5A
- Output voltage: Adjustment Range: ±20%
- Protections: Overload / Over Voltage / Short Circuit
- Category: Switch Mode Power Adapter (SMPS)
- Shell Material: Metal Case / Aluminum Base
- Color: Sliver
-
1.250,00 د.ج
- Input voltage: 100-240VAC
- Output voltage: DC12V
- Max output current: 3A
- Working temperature : -10℃ ~ + 50 ℃
- Storage temperature : -20℃～+85℃
- Power input frequency : 50/60Hz.
-
1.450,00 د.ج
- Input voltage: 100-240VAC
- Output voltage: DC12V
- Max output current: 5A
- Working temperature : -10℃ ~ + 50 ℃
- Storage temperature : -20℃～+85℃
- Power input frequency : 50/60Hz.
-
1.400,00 د.ج
- Input voltage: 100-240VAC
- Output voltage: DC12V
- Max output current: 3A
- Working temperature : -10℃ ~ + 50 ℃
- Storage temperature : -20℃～+85℃
- Power input frequency : 50/60Hz.
-
1.900,00 د.ج
- Input voltage: 100-240VAC
- Output voltage: DC24V
- Max output current: 2A
- Working temperature : -10℃ ~ + 50 ℃
- Storage temperature : -20℃～+85℃
- Power input frequency : 50/60Hz.
-
2.200,00 د.ج – 3.000,00 د.ج
- The extension board can be used for Small CNC routers, Carving Machine, 3D Printers, DIY Laser Cutters, and almost any project where you need to control a stepper motors with high precision
- This shield allows you to control upto 4 stepper motors
- Controller each stepper motor requires 2 IO Pins only, which saves a lot of IO Pins for other purposes
- Arduino compatible
-
1.400,00 د.ج
-
3D Printer Hot Bed Power Expansion Board Heating Controller MOSFET High Current Load Module 25A 12V or 24V for 3D Printer Parts
-
-
450,00 د.ج
-
Package: 3pcs Limit Switch.
-
Compatible with most 3D Printer.
-
Easy to replace.
-
Made of premium metal material for durable use.
-
-
5.000,00 د.ج
- Application: Ender-3/CR-10/CR-10S Pro
Nozzle size: 0.4mm/1.75mm
Teflon tube: 0204,length:1m
Heating tube: 24V 40W, Length: 1m
Thermistor: 100K NTC 3950 ±1% ,Length 1m
- Application: Ender-3/CR-10/CR-10S Pro
-
700,00 د.ج
- Wear-resistant copper sets added in both the inlet and outlet toeffectively extend the product life.
-
Easy to replace.
-
Made of premium metal material for durable use.
-
600,00 د.ج
- Simple step and direction control interface
- Five different step resolutions: full-step, half-step, quarter-step, eighth-step, and sixteenth-step
- Adjustable current control lets set the maximum current output with a potentiometer.
- Intelligent chopping control that automatically selects the correct current decay mode (fast decay or slow decay)
- Over-temperature thermal shutdown, under-voltage lockout, and crossover-current protection
- Short-to-ground and shorted-load protection
-
750,00 د.ج
- Input voltage: 90-220V AC
- Maximum power: 2000W
- Adjustable voltage: 50-220V AC
- Material: plastic, metal
- Chip is 25A. If you use this for voltage adjustment, 1000W, under 5A is nice. If you use this for electrical machine, under 3A is nice.
- Size: 4.8cm x 5.5cm x 2.7cm.
- Weight:41 g
-
63.000,00 د.ج
CNC 3018 PRO Router Kit GRBL 32bit Control 3 Axis DIY Mini + 20W laser
-
1.200,00 د.ج
- The extension board can be used for Small CNC routers, Carving Machine, 3D Printers, DIY Laser Cutters, and almost any project where you need to control a stepper motors with high precision
- This shield allows you to control upto 4 stepper motors
- Controller each stepper motor requires 2 IO Pins only, which saves a lot of IO Pins for other purposes
- Arduino compatible
 |
