Black Micro HDMI To HDMI Cable 1.5M for Raspberry Pi 4
1.300,00 د.ج 1.100,00 د.ج
Ensures reliable, high-performance data transmission.
Gold plated connectors, strain relief and Mylar foil shielding Adapter constructed using high quality material for best connections
Sold Items | Hurry! only 3 left in stock |
Color | Blue, Green |
---|
Based on 0 reviews
|
|
0% |
|
|
0% |
|
|
0% |
|
|
0% |
|
|
0% |
- Very handy and simple in assembling/disassembling.
- Strong components so as to withstand extreme terrain conditions.
- Transparent Car Chassis.
- Attractive design.
- Double layer structure, much of mounting holes, enough space
- Motor power supply is 3V~6V.
- All the parameter above is tested without load
- Please notice that the wooden outside is just a PROTECTION FILM. You need to TEAR OFF the yellow-brown protective paper outside the car chassis, and you will see the transparent clear car chassis inside.
- Please allow 1-2cm errors due to manual measurement
- Item color displayed in photos may be showing slightly different on your computer monitor since monitors are not calibrated same
Set Aluminum Heat Sink Cooling Sink Cooler HeatSink 5Pcs Kit Radiator For Raspberry Pi 4 Model B Gold
- Designed for Raspberry Pi, an ideal alternative solution for HDMI monitor
- Supports all revision of Raspberry Pi (directly-pluggable models)
- Works with Raspbian/Ubuntu directly
- Comes with a full set of screws and nuts for assembly
- 320×480 resolution, better display
- Lightweight and easy to install
- Broadcom BCM2837B0, Cortex-A53 (ARMv8) 64-bit SoC @ 1.4GHz
- 1GB LPDDR2 SDRAM
- 2.4GHz and 5GHz IEEE 802.11.b/g/n/ac wireless LAN, Bluetooth 4.2, BLE
- Gigabit Ethernet over USB 2.0 (maximum throughput of 300 Mbps)
- Extended 40-pin GPIO header
- Full-size HDMI
- 4 USB 2.0 ports
- CSI camera port for connecting a Raspberry Pi camera
- DSI display port for connecting a Raspberry Pi touchscreen display
- 4-pole stereo output and composite video port
- Micro SD port for loading your operating system and storing data
- 5V/2.5A DC power input
- Power-over-Ethernet (PoE) support (requires separate PoE HAT)
- Une carte adaptateur d’extension GPIO rouge(Ne comprend pas la planche à barbe 400 Points)Câble ruban plat 26 broches 2.54-picth 200mm
- RP2040 microcontroller chip designed by Raspberry Pi
- Dual-core Arm Cortex M0+ processor, the flexible clock running up to 133 MHz
- 264KB of SRAM, and 2MB of onboard Flash memory
- The castellated module allows soldering directly to carrier boards
- USB 1.1 with device and host support
- Low-power sleep and dormant modes
- Drag-and-drop programming using mass storage over USB
- 26 × multi-function GPIO pins
- 2 × SPI, 2 × I2C, 2 × UART, 3 × 12-bit ADC, 16 × controllable PWM channels
- Accurate clock and timer on-chip
- Onboard temperature sensor
- Accelerated floating-point libraries on-chip
- 8 × Programmable I/O (PIO) state machines for custom peripheral support
Raspberry Pi 400 is your complete personal computer, built into a compact keyboard. Featuring a quad-core 64-bit processor, 4GB of RAM, wireless networking, dual-display output, and 4K video playback, as well as a 40-pin GPIO header, it’s the most powerful and easy-to-use Raspberry Pi computer yet. Raspberry Pi 400 is also available as part of a complete kit including a mouse, power supply, preloaded SD card, and more.
Smart Electronics New for Arduino Diy Smart Car Robot Reflective Photoelectric 3pin IR Infrared Obstacle Avoidance Sensor Module
Ideal for Android™ Smartphones and Tablets
SanDisk® cards are compatible with Android™ smartphones and tablets.
- Micro SD Card Module Mini TF Card Read and Write Module with SPI Interface
- Set of 3 aluminum heat sinks
- Suitable for Raspberry Pi B+, Pi 2 B, Pi 3B, Pi 4B. Preferably use with Raspberry Pi 4 Model B
- These heat sinks have profiles that are short enough to fit within standard Raspberry Pi cases.
- Material: aluminum
- Color: Black
Mini Small Size Electromagnetic Electric Control Cabinet Drawer Lock Two Options: DC5V-6V or DC 12V
- 30 x 30 x 10mm casing Frame size
- 25mm mounting hole spacing
- Cable Length 28 CM
- 4x 20mm Bolt and nuts are included
- Ready to plug Connector for Pi board
- Color: Black
- Length: 200 mm
- Weight: 30~35 gm each
- 1p-1p pin header
- Compatible with 2.54mm spacing pin headers
- 10pcs chromatic color jump wire
- High quality and in good working condition
- Durable and reusable
- Easy to install and use
- A popular choice for construction or repair
- Be used for the electronic project and Genuine Arduino product
- Flexible Breadboard Jumper Cable Wire allows you plug and unplug easily for prototyping.
- Breadboard connections which allow you plug and unplug easily for prototyping and can be used over and over again.
Beelink GK-Mini Mini PC Windows 10 Intel Gemini Lake Refresh Processor J4125(up to 2.7GHz) Mini Desktop Computer 8GB LPDDR4 128GB SSD,Support 4K FPS,Dual HDMI,USB 3.0,BT 4.0,Auto Power On,WOL
Reviews
There are no reviews yet.