850,00 د.ج – 1.200,00 د.ج- 16 characters wide, 2 rows
- Blue/Green Backlight
- 5×7 Dot Matrix Character + Cursor
- HD44780 Equivalent LCD Controller/driver Built-In
- 4-bit or 8-bit MPU Interface
- Works with almost any Microcontroller
- Can be fully controlled with only 6 digital lines! (Any analog/digital pins can be used)
1.700,00 د.ج1.500,00 د.ج- The LCD Keypad shield is developed for Arduino compatible boards, to provide a user-friendly interface that allows users to go through the menu, make selections etc.
- It consists of a 1602 white character blue backlight LCD.
- The keypad consists of 6 keys select, up, right, down, left and reset.
- To save the digital IO pins, the keypad interface only uses one ADC channel.
- The key value is read out through a 5 stage voltage divider.
2.000,00 د.ج- Supply voltage: 5V
- View angle: 6 O’clock
- Display type: positive / negative type
- Operating temperature: -20°C – +70°C
- Storage temperature: -30°C – 80°C
- Size: approx. 9.8cm x 6cm x 1.2cm
2.200,00 د.ج – 3.000,00 د.ج- The extension board can be used for Small CNC routers, Carving Machine, 3D Printers, DIY Laser Cutters, and almost any project where you need to control a stepper motors with high precision
- This shield allows you to control upto 4 stepper motors
- Controller each stepper motor requires 2 IO Pins only, which saves a lot of IO Pins for other purposes
- Arduino compatible
1.800,00 د.ج1.600,00 د.ج-
Standard For Shield interfaces and shape
-
Can continue to stack other For expansion boards
-
3 M3 screw positioning holes for easy installation
-
High Drive (5V or 3.3V) normally open contact closure
-
Onboard relay indicator (red)
-
750,00 د.ج600,00 د.ج- Simple step and direction control interface
- Five different step resolutions: full-step, half-step, quarter-step, eighth-step, and sixteenth-step
- Adjustable current control lets set the maximum current output with a potentiometer.
- Intelligent chopping control that automatically selects the correct current decay mode (fast decay or slow decay)
- Over-temperature thermal shutdown, under-voltage lockout, and crossover-current protection
- Short-to-ground and shorted-load protection
4.800,00 د.ج3.200,00 د.ج- Works with standard (dual 5/3.3V) and 3.3V-only (for example, Pro Arduino) boards.
- Operates over the extended -40°C to +85°C temperature range
- Complies with USB Specification Revision 2.0 (Full-Speed 12Mbps Peripheral, Full-/Low-Speed 12Mbps/1.5Mbps Host)
- Supports HID devices, such as keyboards, mice, joysticks, etc.
- Compatible with Mass storage devices, such as USB sticks, memory card readers, external hard drives (FAT32 Type File System – Mega Arduino only).
950,00 د.ج850,00 د.ج- Simple step and direction control interface
- Five different step resolutions: full-step, half-step, quarter-step, eighth-step, and sixteenth-step
- Adjustable current control lets set the maximum current output with a potentiometer.
- Intelligent chopping control that automatically selects the correct current decay mode (fast decay or slow decay)
- Over-temperature thermal shutdown, under-voltage lockout, and crossover-current protection
- Short-to-ground and shorted-load protection
160,00 د.ج- Battery type: Zinc Carbon battery
- Dimension: 26.5mm x 48.5mm x 17.5mm
- Nominal voltage: 9V
- Cut-off voltage: 5.4V
- Discharge Resistance(Ω): 620
- Capacity : 600 mAh
1.100,00 د.ج1.000,00 د.ج- Integrated MF RC522
- 13.56MHz contactless communication card chip.
- Low-voltage, low-cost, small size of the non-contact card chip to read and write.
- Suitable for Smart meters and portable handheld devices.
- Advanced modulation and demodulation concept completely integrated in all types of 13.56MHz passive contactless communication methods and protocols.
- 14443A compatible transponder signals.
- ISO14443A frames and error detection.
- Supports rapid CRYPTO1 encryption algorithm, terminology validation MIFARE products.
- MFRC522 support MIFARE series of high-speed non-contact communication, two-way data transmission rate up to 424kbit/s.
- Low cost, and ideal for user equipment development.
- The reader and RF card terminal design meets advanced applications development and production needs.
- Can be directly loaded into the various reader molds, very convenient.
- Supported card types: mifare1 S50, mifare1 S70 MIFARE Ultralight, mifare Pro, MIFARE DESFire
1.000,00 د.ج900,00 د.ج- It can connect to various modules like sensors, servos, relays, buttons, potentiometers
- Each functional module has buckled a port with VCC, GND and Output, which has a corresponding port on the Sensor Shield.
- Make connections easier, secure and more professional looking.
- Sensor Shield V5.0 expansion moudle board for Arduino UNO R3.
- Including all I/O ports’ Pins for UNO R3 main board.
- With a Reset Button.
- Red LED indicates the power status, yellow LED indicates if connected to PIN 13
1.000,00 د.ج900,00 د.ج- Material: Metal
- Dimension: Approx. 57 x 57 x 19mm / 2.2″ x 2.2″ x 0.7
700,00 د.ج650,00 د.ج- Stepper Motor Driver Expansion Board DRV8825 A4988 3D Printer Control Shield
800,00 د.ج- Remote control switch, receiver module, motorcycles, automobile anti-theft products, home security products, electric doors, shutter doors, windows, remote control socket, remote control LED, remote audio remote control electric doors, garage door remote control, remote control retractable doors, remote volume gate, pan doors, remote control door opener, door closing device control system, remote control curtains, alarm host, alarm, remote control motorcycle remote control electric cars, remote control MP3.