Item description:
-[3D Printer Parts]: to drive the feed 1.75mm/3.0mm filament of the extruder.
-[Dimensions]: 40 teeth, 5 mm inner hole diameter, 11 x 11 mm appearance size.
-[High Strength]: Made of brass material with good load capacity, which improves work efficiency.
-[Applicable model]: compatible with 3D printers CR-10, CR-10S, S4, S5, Ender 3 and Ender 3 Pro MK7/8.
-[Wear resistance]: the teeth bite tightly and not sharp, so filaments cannot easily slip and break.
-[Note]: Please confirm size, teeth and material before buying.
Package Include:
1x extruder drive wheel.
Item specifications:
Type: extruder drive wheel.
Filament diameter: 1.75 mm, 3.00 mm.
Inner hole diameter: 5 mm / 2 inches.
Outer diameter: 11 mm / 0.43 inches.
Height: 11 mm / 0.43 inches.
Number of teeth: 40T.
Material: brass.
| MODEL | type A, type B, type C |
|---|
3.900,00 د.ج
- ATmega2560 microcontroller
- Input voltage – 7-12V
- 54 Digital I/O Pins (14 PWM outputs)
- 16 Analog Inputs
- 256k Flash Memory
- 16Mhz Clock Speed
350,00 د.ج – 450,00 د.ج
- GT2 pulley with 20 teeth or grooves is one of the best choices for 3D printer construction. GT2 Timing Pulley 16 Tooth 5mm Bore for 6mm Belt can be used in all range of 3D Printers. It gives better smoothness and accuracy of positioning, resulting in better printing quality.
6.000,00 د.ج
-
The product is divided into two sides of the A.B board.
-
A side:High temperature print layer B side:Low temperature adhesive layer
-
Separate bending to take the model. It is more convenient.
-
No need for beautiful paper and scrapers to assist the model.
-
Can be installed on hot bed and glass platform.
-
Printing does not warp. No glue is needed.
-
Can be printed on a cold bed.
2.300,00 د.ج
- This modified MK8 Extruder has a filament guide tube, all screws, spare drive gear, and upgraded Bowden tube fitting, for CR-10 3D Printer. Our design gives complete support of flexibles from the intake and output ends. We’ve reduced the
price and complexity of printing flexibles. It will also allow to print faster with sustained quality and no risk for grinding the filament.
4.000,00 د.ج
- Print the Widest Range of Materials Possible
- High-Temperature Performance
- High-Quality Printing
- Easy Mounting and Community Support
1.000,00 د.ج
- Stepper motor with a standard interface, when used directly pluggable.
- A, B, C, D four-phase LED indicator which indicates the status of the stepper motor work.
- Compact size stepper motor perfect for small robotics applications.
- Chip all the pins have Input leads Mounted for easy connection to use
- XH-5P socket can be connected directly 28BYJ-48 Model stepper motor
500,00 د.ج
- Environmentally friendly materials, degradable.
- There are many styles and models, and there are different models for different needs.
450,00 د.ج – 700,00 د.ج
- 100k Ohm NTC Thermistor.
- NTC Thin Film Thermistor Cable.
- Nominal value: R25 (25 ℃) : (common) 1.5K, 2K, 5K, 10K, 20K, 30K, 47K, 50K, 100K, 200K, 500K, etc.
- Resistance precision: ± 1%, ± 2%, ± 3%.
- B value R25/50 (common) 3435k, 3600k, 3950k, 3990k, 4100k, 4200k, etc.
- B value accuracy: ± 1%.
- Recommend the use of parameters: R25℃ = 100 k B25/50 = 3950 k ± 1%)
550,00 د.ج – 850,00 د.ج
- Precision registration and timing with no loss of high torque carrying capability
- Minimal vibration and chordal effect Positive slip proof engagement
- Wide speed range, especially important when the entire speed range is developed from a single source
- Virtually no elongation (stretching) due to wear
- Power transmission efficiency is not lost with use
- Clean operation, no need for lubrication
- Reduced noise
- Long, dependable trouble-free service
350,00 د.ج
- 2020 Series Aluminum Profile T-Nuts widely used for building industrial aluminum frame structures, 3D printers, CNC Routers, CNC laser cutters, Robotics Projects
5.500,00 د.ج
- Supreme finish
- Smooth surface
- Long lasting life
- Low cost for control achieved
- High torque at startup and low speeds
- Ruggedness
1.200,00 د.ج
- Red LED checks the state of the proximity sensor
- High repeated positioning accuracy
- High switching frequency
- Wide voltage range
- Total Length of cylinder: 62mm.
- Thread length: 40mm.
- Outer (Theard) Diameter: M12
- Antivibration, dust, water and oil prevention
- Reverse power protection, short circuit protection, directly connecting with PLC
- Can replace small switches and limit switches
350,00 د.ج – 450,00 د.ج
- GT2 pulley with 20 teeth or grooves is one of the best choices for 3D printer construction. GT2 Timing Pulley 20 Tooth 5mm Bore for 6mm Belt can be used in all range of 3D Printers. It gives better smoothness and accuracy of positioning, resulting in better printing quality.
950,00 د.ج
- Made of high quality metal material, anti-rust, sturdy and durable.
- For some screw rods with deviations in installation, the gap can be adjusted to reduce the degree of bending of the screw rod.
- Easy to install, adjustable to meet your needs.
- Suitable for CR10 series, Ender-3, Ender-3 V2 and other machines with screw
75.000,00 د.ج
Anet A8 Plus 3D Printer Complete DIY With Max Printing Size 300*300*350mm
Reviews
There are no reviews yet.